imPoRTanT PReCauTions SAVE THESE INSTRUCTIONS when using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. it is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
Page 3
dANGER WARNING TO REdUCE THE RISk Of ElECTRICAl SHOCk: (CONT.) always unplug the treadmill from the electrical outlet immediately after using, before cleaning, performing maintenance and putting on or • at no time should children under the age of 13 or pets be within 10 feet of the machine. taking off parts.
GROUNdING INSTRUCTIONS BasiC oPeRaTion The treadmill must be grounded. if it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The treadmill is equipped with a cord having an equipment-grounding conductor and a grounding plug.
lOCATION Of THE TREAdMIll pROpER USAGE 12" 305 mm Place the treadmill on a level and stable surface. Please leave a clear zone behind the treadmill that Your treadmill is capable of reaching high speeds. always start off using a slower speed and adjust the speed in small is at least the width of the treadmill and at least 79”...
TENSIONING THE RUNNING bElT CENTERING THE RUNNING bElT For more information and/or how-to videos, visit our Customer support section on our For more information and/or how-to videos, visit our Customer support section on our website. Contact information is located on the back panel. website.
USING THE HEART RATE fUNCTION WIRElESS HEART RATE RECEIVER Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart rate when used in conjunction with a wireless chest transmitter, your heart rate can be transmitted wirelessly to the treadmill and to register.
Please contact Vision Fitness for is qualified to do so. Vision Fitness will provide service and monthly, unplug the treadmill and remove the motor cover. more information.
Page 10
SERIAl NUMbER lOCATION Before proceeding, find your treadmill’s serial number located on a white barcode sticker on the base frame as shown in this image. enTeR YouR seRial numBeR in THe BoX Below: seRial numBeR: VISION T80 TREAdMIll model name:...
ROLLER END CAP your authorized Vision Fitness noTe: a light application of grease may aid in the installation of hardware. any grease, retailer. such as lithium bike grease, is recommended.
Page 12
assemBlY STEp 1 assemBlY STEp 2 open hardware for step 1. open hardware for step 2. HARdWARE fOR STEp 1: HARdWARE fOR STEp 2: attach lead wire to console cable and pull guide console cables from handlebars SPRING FLAT BOLT (A) BOLT (A) SPRING WASHER (B) ARC WASHER (C)
Page 13
assemBlY STEp 3 assemBlY STEp 4 open hardware for step 3. open hardware for step 4. HARdWARE fOR STEp 3: HARdWARE fOR STEp 4: attach the right support bar to the base gently place console base on top of BOLT (F) 95 mm SPRING SPRING...
Page 14
assemBlY STEp 5 assemBlY STEp 6 open hardware for step 5. open hardware for step 6. HARdWARE fOR STEp 5: HARdWARE fOR STEp 6: Remove 2 pre-installed screws to attach the console base cover to the FLAT SPRING BOLT (L) BOLT (M) BOLT (I) remove console rear cover from the...
Fitness Product as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion, discoloration of paint or plastic, or neglect. Vision FiTness shall not be responsible for incidental or consequential damages.
Need help?
Do you have a question about the T80 and is the answer not in the manual?
Questions and answers