Xp / Xp 64-Bit Without Raid Functions; Installing Windows ® Xp / Xp 64-Bit Without Raid Functions; Installing Windows ® 7 / 7 64-Bit / Vista Tm - ASROCK R-4130 Use And Care Manual

Pivot & flex with titanium technology

Hide thumbs

Table Of Contents

Table of Contents

2.22 Installing Windows

XP 64-bit Without RAID Functions

If you want to install Windows

OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the

procedures below according to the OS you install.

2.22.1 Installing Windows

If you want to install Windows

HDDs without RAID functions, please follow the steps below.

Using SATA / SATA2 / SATA3 HDDs with NCQ function

STEP 1: Set Up UEFI.

A. Enter UEFI SETUP UTILITY

B. Set the option "SATA Mode Selection" to [AHCI]. (For SATA3_0, SATA3_1 and

SATA2_2 to SATA2_5 ports.)

Set the option "ASMedia SATA3 Mode" to [AHCI]. (For SATA3_A1 and SATA3_A2

ports.)

STEP 2: Make a SATA / SATA2 / SATA3 driver diskette.

Please make a SATA / SATA2/ SATA3 driver diskette by following section 2.21.1

step 2 on page 54.

STEP 3: Install Windows

After making a SATA / SATA2 / SATA3 driver diskette, you can start to install Win-

dows

XP / XP 64-bit on your system. At the beginning of Windows

F6 to install a third-party AHCI driver. When prompted, insert the SATA / SATA2 /

SATA3 driver diskette containing the Intel

the driver will be presented. Select the driver to install according to the mode you

choose and the OS you install.

Using SATA / SATA2 / SATA3 HDDs without NCQ function

STEP 1: Set Up UEFI.

A. Enter UEFI SETUP UTILITY

B. Set the option "SATA Mode Selection" to [IDE]. (For SATA2_2 to SATA2_5,

SATA3_0 and SATA3_1 ports.)

Set the option "ASMedia SATA3 Mode" to [IDE]. (For SATA3_A1 and SATA3_A2

ports.)

STEP 2: Install Windows

7 / 7 64-bit / Vista