Sleep Timer Mode - HP LP2480ZX User Manual

●
Scanning Inputs. Please Wait—Indicates the monitor is in the process of scanning the DVI
(analog and digital), DisplayPort, and HDMI inputs.
●
Color Gamut Remapping Enabled—Indicates the color gamut remapping has been enabled
because the monitor video input or video signal changed from YUV to an RGB signal.
●
Color Gamut Remapping Disabled—Indicates the color gamut remapping has been disabled
because the monitor video input or video signal changed from RGB to a YUV signal.

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to
power on and off at the same time every day. This also extends the life of the backlight bulbs in the
monitor. The Sleep Timer has five settings:
●
Set Current Time
●
Set Sleep Time
●
Set On Time
●
Timer: On/Off
●
Sleep Now
To set the timer:
1. Press the
2. Scroll down and highlight Management.
3. Press the
4. Scroll down and highlight and select Sleep Timer > Set Current Time.
NOTE:
Time. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is displayed
as 13 hours 15 minutes.
5. Press the
6. Press the
7. Press the
8. Press the
9. Press the
10. After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat
steps 6 through 9 to set Sleep Time.
11. If you do not want to set Sleep Time, press the
Return to exit the menu.
12. After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps 6
through 9 to set On Time.
30 Chapter 4 Operating the Monitor
Menu button on the monitor front panel to display the OSD Menu.
Menu button to select Management.
You must set the current local time before you reset the time for Sleep Time or On
Menu button once to enter the adjustment mode for hours.
- (Minus) or + (Plus) button to adjust the hour.
Menu button again to enter the time for minutes.
- (Minus) or + (Plus) button to adjust the minutes.
Menu button to lock in the time chosen.
Menu button twice, then select Save and