Identifying Monitor Conditions; Sleep Timer Mode - HP LP2275w User Manual

Identifying Monitor Identifying Monitor
Special messages will appear on the monitor screen when identifying the following monitor conditions: Special messages will appear on the monitor screen when identifying the following monitor conditions:
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●

Sleep Timer Mode

Sleep Timer Mode
The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to
power on and off at the same time every day. This also extends the life of the backlight bulbs in the power on and off at the same time every day. This also extends the life of the backlight bulbs in the
monitor. The Sleep Timer has five settings: monitor. The Sleep Timer has five settings:
● ●
● ●
● ●
● ●
● ●
Conditions Conditions
Input Signal Out of Range—Change resolution setting to 1680 × 1050 – 60Hz—Indicates the Input Signal Out of Range—Change resolution setting to 1680 × 1050 – 60Hz
monitor does not support the input signal because the resolution and/or refresh rate are set higher monitor does not support the input signal because the resolution and/or refresh rate are set higher
than the monitor supports (LP2275w Model). than the monitor supports (LP2275w Model).
Input Signal Out of Range—Change resolution setting to 1920 × 1200 – 60Hz—Indicates the Input Signal Out of Range—Change resolution setting to 1920 × 1200 – 60Hz
monitor does not support the input signal because the resolution and/or refresh rate are set higher monitor does not support the input signal because the resolution and/or refresh rate are set higher
than the monitor supports (LP2475w Model). than the monitor supports (LP2475w Model).
No Input Signal—Indicates the monitor is not receiving a video signal from the PC on the monitor No Input Signal —Indicates the monitor is not receiving a video signal from the PC on the monitor
video input connector. Check to determine if the PC or input signal source is off or in the power video input connector. Check to determine if the PC or input signal source is off or in the power
saving mode. saving mode.
Multiple Inputs are Active— Multiple Inputs are Active
monitor is connected to two video inputs. The monitor is trying to display both inputs, but after 10 monitor is connected to two video inputs. The monitor is trying to display both inputs, but after 10
seconds the monitor uses the default signal input. seconds the monitor uses the default signal input.
Auto Adjustment is in Progress—Indicates the auto-adjustmen Auto Adjustment is in Progress
Monitor Going to Sleep—Indicates the screen display is entering a sleep mode. Monitor Going to Sleep —Indicates the screen display is entering a sleep mode.
Check Video Cable—Indicates the video cable is not properly connected to the computer. Check Video Cable —Indicates the video cable is not properly connected to the computer.
OSD Lockout OSD Lockout—The OSD can be enabled or disabled by pressing and holding the —The OSD can be enabled or disabled by pressing and holding the Menu
on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lockout on the front panel for 10 seconds. If the OSD is locked, the warning message
displays for ten seconds. displays for ten seconds.
If the OSD is locked, press and hold the If the OSD is locked, press and hold the Menu
◦ ◦
If the OSD is unlocked, press and hold the If the OSD is unlocked, press and hold the Menu
◦ ◦
Power Button Lockout—Indicates the power button is locked. If the power button is locked, the Power Button Lockout —Indicates the power button is locked. If the power button is locked, the
warning message Power Button Lockout warning message Power Button Lockout displays.
If the power button is locked, press and hold the power button for 10 seconds to unlock the If the power button is locked, press and hold the power button for 10 seconds to unlock the
◦ ◦
power button function. power button function.
If the power button is unlocked, press and hold the power button for 10 seconds to lock out If the power button is unlocked, press and hold the power button for 10 seconds to lock out
◦ ◦
the power button function. the power button function.
Set Current Time Set Current Time
Set Sleep Time Set Sleep Time
Set On Time Set On Time
Timer: On/Off Timer: On/Off
Sleep Now Sleep Now
— Use the OSD to select the desired video input Use the OSD to select the desired video input—Indicates the
—Indicates the auto-adjustment function is
Menu button for 10 seconds to unlock the OSD. button for 10 seconds to unlock the OSD.
Menu button for 10 seconds to lock the OSD.
displays.
—Indicates the
t function is active. active.
OSD Lockout
button for 10 seconds to lock the OSD.
Id Iden enti tify fyin ing Mo g Moni nito tor Co
—Indicates the
—Indicates the
Menu button button
r Cond ndit itio ions ns 31 31