Sleep Timer Mode - HP LA1951g User Manual

●
●
●

Sleep Timer Mode

The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to
power on and off at the same time every day. This also extends the life of the backlight bulbs in the
monitor. The Sleep Timer has five settings:
●
●
●
●
●
To set the timer:
1.
2.
3.
4.
5.
26 Chapter 4 Operating the Monitor
Downloaded from www.Manualslib.com
OSD Lockout—The OSD can be enabled or disabled by pressing and holding the
on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lockout
displays for ten seconds.
◦
If the OSD is locked, press and hold the
◦
If the OSD is unlocked, press and hold the
Power Button Lockout—Indicates the power button is locked. If the power button is locked, the
warning message Power Button Lockout displays.
◦
If the power button is locked, press and hold the power button for 10 seconds to unlock the
power button function.
◦
If the power button is unlocked, press and hold the power button for 10 seconds to lock out
the power button function.
Theft Mode Enabled—Indicates that theft deterrence mode has been activated. Theft deterrence
is an optional feature that can be set up in HP Display Assistant. Theft deterrence mode is triggered
if both the power and display cables have been disconnected from the monitor, the monitor is
reconnected to a different computer, and the theft deterrence PIN number is not entered within the
elapsed time. When the monitor is in theft deterrence mode, all front panel buttons are disabled
other than the power button.
Set Current Time
Set Sleep Time
Set On Time
Timer: On/Off
Sleep Now
Press the Menu button on the monitor front panel to display the OSD Menu.
Scroll down and highlight Management.
Press the Menu button to select Management.
Scroll down and highlight and select Sleep Timer > Set Current Time.
NOTE: You must set the current local time before you reset the time for Sleep Time or On
Time. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is displayed
as 13 hours 15 minutes.
A power failure or loss of power to the monitor will cause the timer to reset to 00:00. If this occurs,
you will need to reset the sleep timer mode.
Press the Menu button once to enter the adjustment mode for hours.
manuals search engine
Menu button for 10 seconds to unlock the OSD.
Menu button for 10 seconds to lock the OSD.
Menu button
ENWW