Adjusting The Monitor Settings; Using The On-Screen Display Menu - HP LP2480ZX User Manual

Adjusting the Monitor Settings

The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display
Assistant software.
NOTE: If you are having a problem with the monitor settings, select the Factory Reset option in the
OSD menu to see if that solves the problem before adjusting other settings in the OSD menu. The
Factory Reset function returns all OSD menu settings and DDC/CI controls to the factory default settings,
except the language.

Using the On-Screen Display Menu

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To
access the OSD, do the following:
1. If the monitor is not already on, press the
2. To access the OSD Menu, press the
3. To navigate through the OSD Menu, press the
down, or the
4. To select an item from the OSD Menu, use the
then press the
5. Adjust the item using the
6. After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting,
then select Exit from the Main Menu.
NOTE: If the front panel buttons remain untouched for 40 seconds while displaying a menu, the OSD
will automatically "time out" and close, and all adjustments made in the OSD will be saved. The factory
default 40 second delay can be adjusted in the OSD to between 10 and 60 seconds.
– (minus) button to scroll up.
Menu button to select that function.
+ or – buttons on the front panel to adjust the scale.
Power button to turn on the monitor.
Menu button on the monitor's front panel.
+ (plus) button on the monitor's front panel to scroll
+ or – buttons to scroll to and highlight your selection,
Adjusting the Monitor Settings 23