HP LP2480ZX User Manual page 33

Table 4-2 OSD Menu (continued)
Icon Main Menu
Video Input
Control
Information
Submenu Description
Horizontal OSD Position Changes the viewing position of the OSD menu to the left or right
area of the screen. The factory default range is 50.
Vertical OSD Position Changes the viewing position of the OSD menu to the top or
bottom area of the screen. The factory default range is 50.
Function Control Selects the operation of the front panel Function button. The
options are Color Space, Brightness, Color Temp, Reset to Last,
Black Level, OverDrive, Custom Scale, Crop (L-C-R), and PIP
Control.
Monitor Status Message Disables or enables the Power-On Status Display and selects the
position the OSD message is displayed on the screen.
Warning Messages Enables or Disables OSD recommendation messages.
Calibration Limit Sets the limit (in backlight hours) for the calibration message. The
range is 0 to 5,000 hours. The factory default is 1000 hours. A
value of 0 disables the timer. The number of backlight hours since
the last calibration is also displayed.
OSD Button Labels Disables or enables the front panel button label display on the
screen.
Mode Display Disables or enables the mode display information that is displayed
on the bottom of the main menu.
OSD Transparency Adjust to view the background information through the OSD.
OSD Timeout Sets the time duration in seconds that the OSD is visible after the
last button is pressed. The range is 10 – 60 seconds. The factory
default is 40 seconds.
OSD Rotation Rotates the OSD menus and messages to support the monitor's
Pivot feature. The choices are 0 and 90 degrees.
Provides a menu of the input options. The default input selection
is DVI-I 1.
DVI-1 Analog/Digital Selects DVI-I 1 as the primary video input. This input accepts
either analog or digital signals.
DVI-2 Analog/Digital Selects DVI-I 2 as the primary video input. This input accepts
either analog or digital signals.
HDMI Selects HDMI as the primary video input.
DisplayPort Selects DisplayPort as the primary video input.
Component Selects Component as the primary video input.
S-Video Selects S-Video as the primary video input.
Composite Selects Composite as the primary video input.
Input Auto-Switching Enables or disables the monitor automatically switching to an
active input if the current signal is inactive. The factory default is
Enabled.
Selects and displays important information about the monitor.
Current Settings Provides the current input video mode.
Adjusting the Monitor Settings 27