Quarter-Height Blades; I/O Module Port Mapping-Full-Height Blades; Standard Lom (Dual-Port) Mapping; Dual-Port Mezzanine Cards - Dell PowerEdge M1000E BMX01 Owner's Manual

Table of Contents

Advertisement

Fabric A
Fabric B Mezzanine
Card
Standard
Infiniband mezzanine
Integrated LOM
card
Standard
Fibre channel
Integrated LOM
mezzanine card

Quarter-Height Blades

A quarter-height blade supports one mezzanine card. The mezzanine card slot supports Fabric B or Fabric C, depending
on the slot in the sleeve where the blade is installed.
I/O Module Port Mapping—Full-Height Blades
NOTE: The I/O port mappings in the following sections are applicable only to the I/O Pass-Through Modules.

Standard LOM (Dual-Port) Mapping

Each LOM has two port connections. For a full-height blade in bay
Integrated LOM1, connection 1 connects to I/O module A1, port
Integrated LOM1, connection 2 connects to I/O module A2, port
Integrated LOM2, connection 1 connects to I/O module A1, port
Integrated LOM2, connection 2 connects to I/O module A2, port
For example, in a full-height blade in slot 5:
Integrated LOM1 connection 1 connects to I/O module A1, port 5.
Integrated LOM1 connection 2 connects to I/O module A2, port 5.
Integrated LOM2 connection 1 connects to I/O module A1, port 13.
Integrated LOM2 connection 2 connects to I/O module A2, port 13.
NOTE: Even though PowerEdge M610x is a full-height blade system, only one network controller (LOM1) is
available.
For PowerEdge M610x blade in bay

Dual-Port Mezzanine Cards

Each mezzanine card has two port connections. For a full-height blade in bay
Fabric C Mezzanine
Card
Ethernet mezzanine
card
Ethernet mezzanine
card
n , the integrated NIC connects to I/O module A1, port n and I/O module A2, port n .
I/O Bay A1, A2 I/O Bay B1, B2 I/O Bay C1, C2
or pass-
through
module
Ethernet
Infiniband
switch module
switch module
or pass-
through
module
Ethernet
Fibre channel
switch module
switch or
or pass-
pass-through
through
module
module
n :
n .
n .
n+8 .
n+8 .
n :
Ethernet switch
module or
pass-through
module
Ethernet switch
module or
pass-through
module
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge m1000e

Table of Contents