Advertisement
burned in for four hours, and tested again. Amplifiers, which pass these rigorous
controls, have truly earned the LINEAR POWER™ Logo.
INSTRUCTIONS
Read the following instructions through completely. If they appear too
complicated, we recommend that you have an authorized LINEAR POWER™
Dealer perform the installation.
MOUNTING
1. The amplifier will work best if it is kept as cool as possible. Mount in a position
that allows air to flow freely through the fins. Be sure there is ample space above
the amplifier to avoid trapping heated air rising from the amplifier. The amplifier
should not be mounted upside down. Avoid mounting any amplifier in the dash or
on the firewall to avoid noises being radiated directly into the case.
2. Mount your amplifier in a position that allows ample room for gain adjustments,
and the installation, removal and attachment of leads.
3. The case of your amplifier is designed to act as a noise shield. To maintain
this protection, be sure the metal case of the amp does not touch the metal of the
car. Do not remove or damage the rubber grommets, which provide electrical
insulation and vibration isolation.
WIRING
1. Disconnect the negative ground cable from your vehicle's battery before
making any power connections to your amplifier.
2. Connect the negative power wire from the amp to a solid frame member via
bolt or self-tapping screw. This connection must be a clean, unpainted surface.
Always attach the ground wire first when installing the amplifier, and disconnect
the ground last when removing the amp from the system.
3. A fuse of proper size must be installed in line with the main power in order to
prevent damage to your wiring. It should be connected to the battery's positive
terminal, or as close to the battery as possible. Use the fuse holder and fuse
provided, and replace only with the same size fuse. The Model 952
uses AGC
©
15-amp fuse. Do not install power fuse until amplifier installation is complete!
WARNING: USE OF OVERSIZE FUSE WILL DAMAGE YOUR AMPLIFIER
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
2
LINEAR POWER™ is a trademark of Linear Power, Inc.
Advertisement
