HP 39G User Manual page 203

To label parts of a
sketch
To create a set of
sketches
To store into a
graphics variable
Notes and sketches
1. Press and type the text in the edit line. To lock the
Alpha shift on, press
(for lowercase).
To make the label a smaller character size, turn off
before pressing . (
large font size). The smaller character size cannot display
lowercase letters.
2. Press .
3. Position the label where you want it by pressing the
, , keys.
4. Press again to affix the label.
5. Press to continue
drawing, or press
to exit Sketch
view.
You can create a set of up to ten sketches. This allows for
simple animation.
• After making a sketch, press
page. You can now make a new sketch, which becomes
part of the current set of sketches.
• To view the next sketch in an existing set, press
Hold down for animation.
• To remove the current page in the current sketch series,
press .
You can define a portion of a sketch inside a box, and then
store that graphic into a graphics variable.
1. In the Sketch view, display the sketch you want to copy
(store into a variable).
2. Press .
3. Highlight the variable name you want to use and press
.
4. Draw a box around the portion you want to copy: move
the cursor to one corner, press
to the opposite corner and press
(for uppercase) or
is a toggle between small and
to add a new, blank
, then move the cursor
.
,
.
14-5