Working With Programs - HP 39G User Manual

Working with programs

Copy a
program
H I N T
Transmit a
program
Delete a
program
15-8
You can use the following procedure if you want to make a
copy of your work before editing—or if you want to use one
program as a template for another.
1. Press to open the Program catalog.
PROGRM
2. Press .
3. Type a new file name, then choose
The Program Editor opens with a new program.
4. Press to open the Variable menu.
5. Press to quickly scroll to Program.
6. Press , then highlight the program you want to copy.
7. Press , then press
The contents of the highlighted program are copied into
the current program at the cursor location.
If you use a programming routine often, save the routine
under a different program name, then use the above method to
copy it into your programs.
You can send programs to, and receive programs from, other
calculators just as you can send and receive aplets, matrices,
lists, and notes.
After aligning the calculators' infrared ports, open the
Program catalogs on both calculators. Highlight the program
to send, then press on the sending calculator and
on the receiving calculator.
You can also send programs to, and receive programs from, a
remote storage device (aplet disk drive or computer). This
takes place via a cable connection and requires an aplet disk
drive or specialized software running on a PC (such as a
connectivity kit).
You can delete any program except Editline.
1. Press to open the Program catalog.
PROGRM
2. Highlight a program to delete, then press
.
.
.
Programming