HP 39G User Manual page 121

Choose
inference
method and
type
Set up the
interval
calculation
Import the data
Inference aplet
7. Choose an inference method.
Select CONF INTERVAL
8. Choose a distribution statistic type.
Select T-Int: 1
9. Set up the interval calculation. Note: The default values
are sample data from the on-line help example.
-
SETUP NUM
10. Import the data from the Statistics aplet. Note: The data
from C1 is displayed by default.
Note: If there are other
columns of data in the
Statistics aplet, you could
select a column and press
to see the statistics before importing them into the
Numeric Setup view. Also, if there is more than one aplet
based on the Statistics aplet, you are prompted to choose
one.
9-7