Network - Vivotek IZ7151 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Network

This section explains how to configure wired network connection for the Network Camera� It is
composed of the following five columns: Network Type, HTTP, Two way audio, FTP and RTSP
Streaming� When completed with the settings on this page, click Save to take effect�
Network Type
LAN
Select this option when the Network Camera is deployed in a local area network and is intended to
be accessed by local computers�
Select this option to obtain an available dynamic IP address
Get IP address automatically :
assigned by a DHCP server each time the camera is connected to the local area network�
Select this option to manually assign a static IP address to the Network
Use fixed IP address :
Camera� See Internet connection with static IP on page 9 for details�
Select this option to enable UPnP presentation for your Network
Enable UPnP presentation : TM
Camera so that whenever a Network Camera is presented to the local area network, shortcuts of
is supported
connected Network Cameras will show up at My Network Places� Currently, UPnP TM
by Windows XP or later� Note that to utilize this feature, please make sure the UPnP components
TM
is enabled on your computer�
To access the Network Camera from the Internet, select this option
Enable UPnP port forwarding :
to allow the Network Camera to open ports on the router automatically so that video streams can
be sent out from a local area network� To utilize of this feature, make sure that your router supports
UPnP and it is activated�
TM
User's Manual - 7