Vivotek IP7135 User Manual
  1. Manuals
  2. Brands
  3. Vivotek Manuals
  4. Security Camera
  5. IP7135
  6. User manual

Vivotek IP7135 User Manual

3ggp/isma
Hide thumbs Also See for IP7135:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP7135 and is the answer not in the manual?

Questions and answers

Related Manuals for Vivotek IP7135

Summary of Contents for Vivotek IP7135

  • Page 2 Product name: Network Camera (IP7135) Release Date: 2007/10/16 Manual Revision: 1.30 Web site: www.vivotek.com Email: technical@vivotek.com sales@vivotek.com Made in Taiwan. ©Copyright 2000-2007. All rights reserved - 1 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 3: Before You Use This Product

    For paragraphs preceded by completely the warnings. Ignoring the warnings may result in serious hazards or injuries. This also ensures the product is used properly as the reader should use caution to understand - 2 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 4: Table Of Contents

    System parameters ... 24 Security settings ... 25 Network settings... 26 Network type ... 26 HTTP ... 27 RTSP Streaming ... 27 DDNS... 29 Access List ... 30 Audio and Video... 31 - 3 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 5 Available parameters on the server ... 48 Application page CGI command ... 57 Capture single snapshot ... 60 Account management ... 61 System logs... 62 Configuration file ... 62 Upgrade firmware ... 63 - 4 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...
  • Page 6 D. Technical specifications ... 64 - 5 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 7: Package Contents

    Package Contents IP7135 Power adapter Camera stand Software CD Quick installation guide Warranty card - 6 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532...

  • Page 8: Installation

    UTP Category 5 and not exceed 100 meters in length. Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock. - 7 - www.vivotek.com...

  • Page 9: To Install In Ethernet

    Network Cameras in the local network. Users can differentiate the Network Cameras with the serial number. The serial number is printed on the labels on the carton and the back of the Network Camera body. Please refer to the user’s manual of Installation Wizard for detail. - 8 - www.vivotek.com...

  • Page 10: Initial Access To The Network Camera

    “root”. Once the password is changed, the browser will display an authentication window to ask for the new password. Once the password is set, there is no provision to recover the Administrator’s password. The - 9 - www.vivotek.com...

  • Page 11: How To Use

    The foreground is the login window and the background shows the message if authentication fails. The user may check the option box to save the password for future convenience. This option is not available to the Administrator for obvious reason. - 10 - www.vivotek.com...

  • Page 12: Installing Plug-In

    Users may click on to proceed. If the web browser does not allow the user to continue to install, check the Internet security option and lower the security levels or contact your IT or networking supervisor for help. - 11 - www.vivotek.com...

  • Page 13: Primary User's Capability

    The main page layout has two parts: Configuration functions: The camera can be configured using these user interfaces. Camera View: What the camera sees. Click on the configuration link to the left of the image window to enter the configuration page. - 12 - www.vivotek.com...

  • Page 14: Digital Zoom

    Uncheck “Disable digital zoom” and use the slider control to change the zoom factors. Snapshot Click on “Snapshot”, web browser will pop up a new window to show the snapshot. Users can point at the snapshot and click the right button of mouse to save it. - 13 - www.vivotek.com...

  • Page 15: Client Settings

    The user may click on to install the plug-in. If the web browser does not allow the user to complete the installation, check the Internet security to lower the security level or contact your IT or networking supervisor. - 14 - www.vivotek.com...
  • Page 16 PC and will be used for the next connection. If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol, save, and return HOME to - 15 - www.vivotek.com...
  • Page 17 <url> http://<Network Camera>/client.html <Network Camera> is the domain name or the original IP address of the Network Camera. - 16 - www.vivotek.com...

  • Page 18: Administrator's Capability

    “Maximum frame rate”, “Constant bit rate”, and “Fix quality” on the Audio and Video Configuration page, are correlative to allow for achieving the best performance possible. For Viewing by Mobile Phone Most 3GPP cell phone supports media streaming with MPEG4 video and GSM-AMR - 17 - www.vivotek.com...

  • Page 19: Only Quality Images Will Do

    Somewhere Between Real-time and Clear Images If you have a broadband network, set “Fix quality” at ”Normal” or better, rather than setting “Fix bit rate”. You can also fix the bandwidth according to your actual network - 18 - www.vivotek.com...
  • Page 20 Start from 30 fps down for best results but not below 15 fps. If the image qualities are not improved, select a lower bandwidth setting. - 19 - www.vivotek.com...

  • Page 21: Opening Accounts For New Users

    This password is used to identify the administrator. Then add an account with user name and password for your friends in ○ accounts for your valuable customers or friends. You may delete some users from ○ . Network Camera can provide twenty - 20 - to enable protection. www.vivotek.com...

  • Page 22: Build A Security Application

    12.Set the delay before detecting next motion to avoid continuous false alarms following the original event, 13.Set the number of pre-event and post-event images to be uploaded, 14.Check the window name set in step 5, 15.Check the way to upload snapshot, Click on save to validate. - 21 - www.vivotek.com...

  • Page 23: Software Revision Upgrade

    Software revision upgrade Customers can obtain the up-to-date software from the web site of Vivotek. An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only. To upgrade the system, follow the procedures below.

  • Page 24: Definitions In Configuration

    URL, read the reference appendix for details. <url> http://<Network Camera>/setup/config.html <Network Camera> is the domain name or original IP address of the Network Camera. <url> http://<Network Camera>/setup/system.html <Network Camera> is the domain name or original IP address of the Network Camera. - 23 - www.vivotek.com...

  • Page 25: System Parameters

    "Time zone" Adjust the time with that of the time-servers for local settings. “Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server. Remember to click on to immediately validate the changes. Otherwise, the correct time will not be synchronized. - 24 - www.vivotek.com...

  • Page 26: Security Settings

    The new user will be displayed in the user name list. There is a maximum of twenty user accounts. “Manager user” Pull down the user list to find the user’s name and press complete. <url> http://<Network Camera>/setup/security.html <Network Camera> is the domain name or original IP address of the Network Camera. - 25 - www.vivotek.com...

  • Page 27: Network Settings

    “Enable UPnP presentation” Enable the UPnP camera short cut “Enable UPnP port forwarding” Enable uPnP port forwarding “PPPoE” If using the PPPoE interface , fill the following settings from ISP “User name” The login name of PPPoE account - 26 - www.vivotek.com...

  • Page 28: Http

    “http://192.168.0.100:8080” instead of “http://192.168.0.100”. RTSP Streaming “Access name” This is the access URL for making connection from client software. Using rtsp://<ip address>/<access name> to make connection “RTSP port” This can be other than the default Port 554 - 27 - www.vivotek.com...
  • Page 29 <url> http://<Network Camera>/setup/network.html <Network Camera> is the domain name or original IP address of the Network Camera. - 28 - www.vivotek.com...

  • Page 30: Ddns

    “Password/Key” Please input the password or key to get the DDNS service. “Save” Click on this button to save current settings for the DDNS service and UPnP function. <url> http://<Network Camera>/setup/ddns.html <Network Camera> is the domain name or original IP address of the Network Camera. - 29 - www.vivotek.com...

  • Page 31: Access List

    Delete button. Both the Allow List and Deny List can have 20 entries. <url> http://<Network Camera>/setup/accesslist.html <Network Camera> is the domain name or original IP address of the Network Camera. - 30 - www.vivotek.com...

  • Page 32: Audio And Video

    Consequently, to ensure detailed video quality (quantization rate) regardless of the network, it will utilize more bandwidth to send the maximal frames when images change drastically. Video orientation “Flip” Vertically rotate the video. - 31 - www.vivotek.com...

  • Page 33: Audio Settings

    “Mirror” Horizontally rotate the video. Check options both if the Network Camera is installed upside down. “White balance” Adjust the value for best color temperature. Audio settings “mute” Audio mute “Audio type” Select audio codec “AAC” or “GSM-AMR” and the bit rate <url> http://<Network Camera>/setup/audiovideo.html - 32 - www.vivotek.com...

  • Page 34: Image Settings

    “Contrast” fields the value 0 indicates auto tuning. The user may press fine-tune the image. When the image is O.K., press to set the image settings. the original settings without incorporating the changes. - 33 - Click on this to recall www.vivotek.com...

  • Page 35: Email & Ftp

    The network camera will use primary server as default , and use secondary server when primary server is unreachable. “Server address” The domain name or the IP address of the external FTP server. The following user settings must be correctly configured for remote access. - 34 - www.vivotek.com...
  • Page 36 Refer to the instructions for the external FTP server for details. The folder privilege must be open for upload. <url> http://<Network Camera>/setup/mailftp.html <Network Camera> is the domain name or original IP address of the Network Camera. - 35 - www.vivotek.com...

  • Page 37: Motion Detection

    Higher sensitivity and small percentage will allow easier motion detection. The following figure shows the screen when is clicked. The monitoring window has been outlined in red and the graphic bar goes red since the goldfish is moving. - 36 - www.vivotek.com...

  • Page 38: Application Settings

    There are three windows for motion detection each can be assigned a name. Select the windows which need to be monitored. If motion detection has not been set up, “undefined” will be shown instead of the window title. If this happens, clicking on - 37 - www.vivotek.com...

  • Page 39: Sequential Operation

    JPEG image was captured in the year 2003, January the 2 , at 3 o’clock, 4 minute, and 5 second. If this suffix is omitted, the file named “video.jpg” on the external FTP server will be refreshed at the specified interval. - 38 - www.vivotek.com...
  • Page 40 - 39 - www.vivotek.com...
  • Page 41 - 40 - www.vivotek.com...

  • Page 42: System Log

    Check “Enable remote log” and input the “IP address” and “port” number of the log server to enable the remote log facility. In the “Current log”, it displays the current system log file. The content of the log provides useful information about configuration and connection after system boot- up. - 41 - www.vivotek.com...

  • Page 43: Viewing System Parameters

    Viewing system parameters Click on this link on the configuration page to view the entire system’s parameter set. The content is the same as those in CONFIG.INI. - 42 - www.vivotek.com...

  • Page 44: Maintenance

    Any changes made so far will be lost and the system will be reset to the initial factory settings. The system will restart and require the installer program to set up the network again. “upgrade firmware” Select the firmware file and click upgrade button - 43 - www.vivotek.com...

  • Page 45: Appendix

    RESET: Click on the button. RESTORE: 1. Press on the button continuously. 2. Wait for self-diagnostic to run twice. 3. Free the button as soon as the second self-diagnostic starts. - 44 - www.vivotek.com...

  • Page 46: Url Commands Of The Network Camera

    When query parameter values, the current parameter value are returned. Successful control requests returns paramter pairs as follows. Return: HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: <length>\r\n \r\n <parameter pair> where <parameter pair> is <parameter>=<value>\r\n [<parameter pair>] - 45 - www.vivotek.com...

  • Page 47: Set Server Parameter Values

    Redirect to the page <return page> after the parameter is assigned. The <return page> can be a full URL path or relative path according the the current path. If you omit this parameter, it will redirect to an empty page. - 46 - parameter www.vivotek.com...
  • Page 48 \r\n network.ipaddress=192.168.0.123\r\n (note: The return page can be a general HTML file(.htm, .html) or a Vivotek server script executable (.vspx) file. It can not be a CGI command. It can not have any extra parameters. This parameter must be put at end of parameter list) - 47 - www.vivotek.com...

  • Page 49: Available Parameters On The Server

    NTP automatic update interval. <0> 12 characters mac address without hyphen connected string shorter The version of firmware, including model, company, and version number Restore the system parameters to default value. - 48 - www.vivotek.com...
  • Page 50 <blank> - only permit to view live media conf – Permit to change server’s configuration <blank> The current account number on the server including root.<1> DESCRIPTION PPPoE PPPoE account user name <blank> PPPoE account password <blank> - 49 - www.vivotek.com...
  • Page 51 <blank> User name of primary smtp server <blank> Password of primary smtp server <blank> secondary SMTP server <blank> mail recipient address <blank> User name of secondary smtp server <blank> Password of secondary smtp server <blank> - 50 - www.vivotek.com...
  • Page 52 <blank> password for secondary FTP server <blank> upload folder in secondary FTP server <blank> Enable passive mode of primary FTP server Disable passive mode of primary FTP server less HTTP port <80> less RTSP port <554> - 51 - www.vivotek.com...
  • Page 53 Denied starting RTSP connection IP address <blank> Denied ending RTSP connection IP address <blank> DESCRIPTION shorter enclosed caption <blank> MPEG4 MJPEG Key frame interval <60> half half x 2 normal normal x 2 double This field is obsolete (use resolution) - 52 - www.vivotek.com...
  • Page 54 3000K bps set bit rate to 4000K bps set maximum frame rate to 1 fps set maximum frame rate to 2 fps set maximum frame rate to 3 fps set maximum frame rate to 5 fps - 53 - www.vivotek.com...
  • Page 55 AAC bitrate to 48K bps set AAC bitrate to 64K bps set AAC bitrate to 96K bps set AAC bitrate to 128K bps set AMR bitrate to 4.75K bps set AMR bitrate to 5.15K bps - 54 - www.vivotek.com...
  • Page 56 #1 enable motion window #1 string shorter name of motion window #1 <blank> Left coordinate of window position. <0> Top coordinate of window position. <0> Width of motion detection window. <0> - 55 - www.vivotek.com...
  • Page 57 <1> Your dynamic hostname. <blank> Your user or email to login ddns service provider <blank> Your password or key to login ddns service provider <blank> Update the above ddns settings to take effect - 56 - www.vivotek.com...

  • Page 58: Application Page Cgi Command

    DESCRIPTION Enable or disable the UPNP port forwarding service. <0> DESCRIPTION File name of script <script.vssx> Disable script Enable script DESCRIPTION disable remote log enable remote log Log server IP address Server port used for log - 57 - www.vivotek.com...
  • Page 59 Syntax (For snapshot): http://<servername>/cgi-bin/admin/gen-new-eventd-conf.cgi? [<prefix_app_index>_snapshot_enable=<value>] [&<prefix_app_index>_weekday=<value>] [&<prefix_app_index>_time_method=<value>] [&<prefix_app_index>_begin_time=<value>] [&<prefix_app_index>_end_time=<value>] [&<prefix_app_index>_prefix=<value>] [&<prefix_app_index>_trigger_type=<value>] [&<prefix_app_index>_md_win=<value>] [&<prefix_app_index>_md_prenum=<value>] [&<prefix_app_index>_md_postnum=<value>] [&<prefix_app_index>_md_delay=<value>] [&<prefix_app_index>_sq_interval=<value>] [&<prefix_app_index>_send_method=<value] [&<prefix_app_index>_ftp_suffix=<value>] Syntax (For videoclip): http://<servername>/cgi-bin/admin/gen-new-eventd-conf.cgi? [<prefix_app_index>_videoclip_enable=<value>] [&<prefix_app_index>_weekday=<value>] [&<prefix_app_index>_time_method=<value>] [&<prefix_app_index>_begin_time=<value>] [&<prefix_app_index>_end_time=<value>] [&<prefix_app_index>_prefix=<value>] [&<prefix_app_index>_trigger_type=<value>] [&<prefix_app_index>_maxsize=<value>] [&<prefix_app_index>_md_win=<value>] [&<prefix_app_index>_md_delay=<value>] [&<prefix_app_index>_sq_interval=<value>] [&<prefix_app_index>_send_method=<value>] [&<prefix_app_index>_ftp_suffix=<value>] - 58 - www.vivotek.com...
  • Page 60 Enable videoclip application The array indicate weekly schedule 24 hours full day Select begin time and end time Begin time of weekly schedule End time of weekly schedule Snapshot/Videoclip file name prefix for both event and sequential operation - 59 - www.vivotek.com...

  • Page 61: Capture Single Snapshot

    The numbers of snapshot before event The numbers of snapshot after event The delay seconds for detecting next motion event The interval seconds of sequential snapshot Send snapshot by mail Send snapshot by ftp Enable/Disable file name prefix - 60 - www.vivotek.com...

  • Page 62: Account Management

    The default value is an empty string. The privilege of user to add or to modify. The privilege can be the addition of the following values. Ex: A user with configure access can be assigned privilege as privilege=conf. configuration privilege - 61 - www.vivotek.com...

  • Page 63: System Logs

    Redirect to the page <return page> after the parameter is assigned. The <return page> can be a full URL path or relative path according the the current path. If you omit this parameter, it will redirect to an empty page. - 62 - www.vivotek.com...

  • Page 64: Upgrade Firmware

    Note: This request requires administrator privilege Method: POST Syntax: http://<servername>/cgi-bin/admin/upgrade.cgi Post data: fimage=<file name>[&return=<return page>]\r\n \r\n <multipart encoded form data> Server will accept the upload file named <file name> to be upgraded the firmware and return with <return page> if indicated. - 63 - www.vivotek.com...

  • Page 65: Led Indicator

    D. Technical specifications - System Vivotek VVTK-1000 CPU: RAM: 32MB SDRAM ROM: 4MB FLASH ROM Networking Protocol TCP/IP, HTTP, SMTP, FTP, DDNS, UPnP, Telnet, NTP, DNS, DHCP and RTSP Physical 10 baseT or 100 baseT Fast Ethernet auto negotiation - Video...

  • Page 66: Technology License Notice

    Technology License Notice MPEG-4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT REGARD TO PC SOFTWARE, YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES. MORE INFORMATION, PLEASE REFER...

  • Page 67: Electromagnetic Compatibility (Emc)

    B of EN55022/1998, and the requirement for immunity according to EN50082-1/1992. Liability Vivotek Inc. cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Vivotek Inc. makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for any particular purpose.

Table of Contents