Acousti-Phonic; Acoustic Volume And Magnetic Input - Graphtech Ghost User Manual

Acousti-Phonic

Locate the Acousti-Phonic where it can accept plug-in connections
from the 1/4" jack, the saddle pickups, the battery, and options if
applicable. Attach it, using the self adhesive foam tape on the back, to
the side or back of the control cavity or to the inside of the cover plate.

Acoustic volume and magnetic input

The Basic Acousti-Phonic does not include a volume pot, but
instead a wiring harness is provided to convert one of your tone
controls into the Acoustic Volume Pot. (The Advanced Kit includes
the Acoustic Volume with Mid/Dark Switch complete with harness,
or you can order it as a separate item) The pot you convert should
be either 250k or 500k to work properly with the Acousti-Phonic.
(If you would like to operate the Acousti-Phonic without a volume
pot, you can install the wiring harness only and get acoustic
output always at full volume. Solder the purple and yellow
wires together, and coil up the black wire and leave it unused.)
56