Table of Contents
Advertisement
Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery.
Remove the fan:
1.
Disconnect the fan cable (1) from the system board.
2.
Loosen the 3 Phillips PM2.0×3.0 screws (2) that secure the fan to the computer.
Bottom cover on page
29).
Spare part number
744363-001
Component replacement procedures
41
Hide quick links:
Advertisement
Table of Contents
