Solid-State Drive (Ssd) - HP Spectre 13 Pro Ultrabook Maintenance Manual

Solid-state drive (SSD)

Description
512-GB mSATA, SSD
256-GB mSATA, SSD
128-GB mSATA, SSD
Before removing the solid-state drive module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery.
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the computer. The rear of the
drive pops up.
30 Chapter 4 Removal and replacement procedures
Bottom cover on page 29).
Spare part number
744380-001
744379-001
744378-001