Reviewing Stored Message Codes - Radio Shack Tone/Vibration Pager Owner's Manual

17-6024.fm Page 8 Friday, August 6, 1999 11:00 AM
SETTING THE PAGER'S MODE
Slide to for audible alerts, or for silent
/ /OFF
alerts. When the pager receives a message code, the
code flashes on its display. With set to , the
/ /OFF
pager sounds three series of four beeps for individual
and group paging, or 12 continuous beeps for all-paging.
With set to , the pager vibrates for about 3.5
/ /OFF
seconds.
Press to stop an alert during or just after the
/ /OFF
alert. If you do not stop the alert and the pager is set to
alert audibly, the pager beeps every minute to remind
you there is a new page.
Note: If the pager receives the same code twice within 30
seconds, it ignores the second message code.
REVIEWING STORED MESSAGE
CODES
The pager can store up to eight message codes. Repeat-
edly press to view the stored message codes
/ /OFF
from the latest to the oldest. appears to indicate the
-
end of the stored message codes.
8