Radio Shack Tone/Vibration Pager Owner's Manual page 2

17-6024.fm Page 2 Friday, August 6, 1999 11:00 AM
FEATURES
Your RadioShack Tone/Vibration Pager works with your
4-Watt Wireless Paging System (Cat. No. 17-6023) to
keep you accessible in any environment where you need
to be able to receive important messages.
When the pager gets a signal from the system's transmit-
ter, it beeps or vibrates, depending on the setting you se-
lected, and shows the message code on its display. The
silent paging mode allows you to stay accessible without
disturbing others around you. Add this pager to your ex-
isting system if you have more than one person you need
to page.
Non-Volatile Memory — stores system and pager codes
(not messages) for over one year, even with weak or
dead batteries.
Message Memory — stores the last eight message
codes in the pager and lets you review them with the
touch of a button before the pager is switched off.
Digital Display — shows 10 different message codes
(0–9) received from the paging system's transmitter.
Battery Sentinel — shows when the pager's battery lev-
el is low.
©
1999 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
2