Related Manuals for Radio Shack Tone/Vibration Pager
Summary of Contents for Radio Shack Tone/Vibration Pager
- Page 1 17-6024.fm Page 1 Friday, August 6, 1999 11:00 AM Cat. No. 17-6024 OWNER’S MANUAL Please read before using this equipment. Tone/Vibration Pager...
- Page 2 17-6024.fm Page 2 Friday, August 6, 1999 11:00 AM FEATURES Your RadioShack Tone/Vibration Pager works with your 4-Watt Wireless Paging System (Cat. No. 17-6023) to keep you accessible in any environment where you need to be able to receive important messages.
-
Page 3: Installing Batteries
17-6024.fm Page 3 Friday, August 6, 1999 11:00 AM PREPARATION INSTALLING BATTERIES The pager is powered by two AAA batteries (not sup- plied). We recommend RadioShack alkaline batteries. You can also use rechargeable nickel-cadmium or nickel- metal hydride batteries, also available at your local Ra- dioShack store. - Page 4 17-6024.fm Page 4 Friday, August 6, 1999 11:00 AM 3. Insert two fresh AAA batteries, as indicated by the polarity symbols (+ and –) marked inside the com- partment. 4. Replace the cover and slide on both sides LOCK toward the back of the pager. Note: The pager retains pager codes in memory without power for up to 1 year.
-
Page 5: Using The Belt Clip
17-6024.fm Page 5 Friday, August 6, 1999 11:00 AM USING THE BELT CLIP Use the belt clip on the back of the pager to clip the pager on your belt for hands-free carrying when you are on the... -
Page 6: Operation
17-6024.fm Page 6 Friday, August 6, 1999 11:00 AM OPERATION STORING THE PAGER CODE Display Area Before you use the pager, you must set the codes which identi- fy the pager and paging system. 1. Slide on the / /OFF pager to 2. - Page 7 17-6024.fm Page 7 Friday, August 6, 1999 11:00 AM If you want the pager to have a new pager code, enter the new 3-digit pager code and , then press PAGE After you press , the transmitter flashes the 4- PAGE digit code seven times and transmits the pager and system codes to the pager.
-
Page 8: Reviewing Stored Message Codes
17-6024.fm Page 8 Friday, August 6, 1999 11:00 AM SETTING THE PAGER’S MODE Slide for audible alerts, or for silent / /OFF alerts. When the pager receives a message code, the code flashes on its display. With set to , the / /OFF pager sounds three series of four beeps for individual and group paging, or 12 continuous beeps for all-paging. - Page 9 17-6024.fm Page 9 Friday, August 6, 1999 11:00 AM Notes: • When the memory is full and a new message is received, the oldest message code is deleted from memory. • If a new message code is identical to the last mes- sage received, it will not be stored.
-
Page 10: Care And Maintenance
17-6024.fm Page 10 Friday, August 6, 1999 11:00 AM CARE AND MAINTENANCE To enjoy your RadioShack Tone/Vibration Pager for a long time: • Keep the pager dry. If it gets wet, wipe it dry immedi- ately. • Use and store the pager only in normal temperature environments. -
Page 11: Specifications
17-6024.fm Page 11 Friday, August 6, 1999 11:00 AM SPECIFICATIONS Operating Voltage ....3 Volts (2 AAA Batteries) Current Drain ......Standby, 3mA Maximum Beeping, 30mA Maximum Vibrating, 180mA Maximum Pager Codes ........1000 Combinations Reminding Beep Rate ......1 Beep per Minute Message Code Numbers ........ - Page 12 17-6024.fm Page 12 Friday, August 6, 1999 11:00 AM Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from Ra- dioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURA-...