Operation; Set Volume - Optimus Single Channel 170 MHz Wireless FM PA Amplifier System User Manual

32-1240.fm Page 4 Monday, July 26, 1999 12:09 PM

Operation

1. Set to the minimum level.
VOLUME
2. Set to
ON/OFF ON
cator lights.
3. Set the wireless microphone's
switch to
STANDBY/ON
READY indicator lights.
4. Adjust
WIRELESS MIC VOLUME
the desired level slowly.
5. Connect the wired microphone to
the amplifier's
MIC
the back of the amplifier.
6. Set the microphone' switch to ON.
4
. The power indi-
Note: You can use a wireless micro-
phone and a wired microphone at the
same time.
OFF/
. The
ON
to
jack located on
7. Adjust your amplifier's wired micro-
phone volume control to the desired
level.
8. Turn the volume levels to the mini-
mum position and press the power
switch to when the amplifier is
OFF
not in use.