Transition Effects - Roland VR-3EX Owner's Manual

Main Output Audio
(MAIN [SETUP] button)
Setting item Value
MAIN LEVEL 0–127
0–127
AUX LEVEL
PHONES LVL 0–127
USB LEVEL -63–+63
0.0–500.0 ms
USB DELAY
EQ HI -15–0–15 dB
700 Hz–8.00 KHz–11.0 KHz
FREQ
EQ MID -15–0–15 dB
FREQ 20.0 Hz–2.50 KHz–10.0 KHz
Q 0.5–16.0
EQ LO -15–0–15 dB
FREQ 55 Hz–110 Hz–800 Hz
REVERB 0–127
TIME 0.0–1.0–5.0 s
TYPE Room, Hall
MASTERING ON, OFF
NS 0–127
ENHANCER 0–127
0–127
MASTER HIGH
0–127
MASTER MID
0–127
MASTER LO
BUS SELECT -
AUDIO FOLLOW -
SOLO CLEAR -
MUTE CLEAR -
AUDIO FOLLOW Screen
ON, OFF
AUDIO FOLLOW
(Matrix chart) ON, OFF
Video Effects
(VIDEO FX [SETUP] button)
Setting item Value
STROBE, NEGATIVE, COLORIZE, FINDEDGE,
FX1 SILHOUETTE, MONOCHROME, SEPIA, EMBOSS,
POSTERIZE, COLOR PASS, MULTI, OFF
STROBE, NEGATIVE, COLORIZE, FINDEDGE,
SILHOUETTE, MONOCHROME, SEPIA, EMBOSS,
FX2
POSTERIZE, COLOR PASS, MULTI, OFF

Transition Effects

(TRANSITION [SETUP] button)
Setting item Value
MIX MIX, FAM, NAM
Wipe01–99, SWipe01–99,
WIPE
Slide01–26, Stretch01–26
Explanation
This adjusts the volume level of the main output audio.
This adjusts the volume level of audio output from the AUX bus.
This adjusts the volume of headphones connected to the PHONES jacks.
This adjusts the volume level of audio output from the USB port.
This adjusts the delay time for audio output from the USB port.
This boosts or attenuates the high band.
This adjusts the center frequency when changing the sound quality in the high band.
This boosts or attenuates the middle band.
This adjusts the center frequency when changing the sound quality in the middle band.
This adjusts the width of the frequency band when boosting or attenuating the middle band.
This boosts or attenuates the low band.
This adjusts the center frequency when changing the sound quality in the low band.
This adjusts the return level from reverb of the audio. A setting of "0" results in no reverb
applied.
This adjusts the length of the reverb.
This specifies the type of reverb.
This switches mastering on and off.
This adjusts the degree of application of the noise suppressor.
This adjusts the degree of application of the enhancer.
This suppresses high-frequency distortion and adjusts the sound to have sustained tones.
This suppresses midrange distortion and adjusts the sound to have distinct tones.
This suppresses low-frequency distortion and adjusts the sound to have stable tones.
This displays the BUS SELECT screen (p. 39).
This displays the AUDIO FOLLOW screen (see below).
This clears all Solo settings.
This clears all Mute settings.
This sets the Audio Follow feature on or off.
This sets the input audio to use with Audio Follow for each video channel. When set to "ON, "
Audio Follow is applied.
Explanation
This sets the effect assign to "FX1" on the [VIDEO FX] knob. When set to "OFF, " no effect is
assigned.
This sets the effect assign to "FX2" on the [VIDEO FX] knob. When set to "OFF, " no effect is
assigned.
Explanation
This sets the transition pattern assigned to the TRANSITION [MIX] button.
This sets the transition pattern assigned to the TRANSITION [WIPE] button.
Appendices
51