Related Manuals for Vision TF40
Summary of Contents for Vision TF40
- Page 1 TF 40 TF 20 T 40 TReadmill owneR’s manual Read the TReadmill guide before using this owneR’s manual.
-
Page 2: Important Precautions
Vision Fitness retailer. - Page 3 dANGER WARNING TO REdUCE THE RISk Of ElECTRICAl SHOCk: TO REdUCE THE RISk Of bURNS, fIRE, ElECTRICAl SHOCk OR INjURy TO PERSONS: • at no time should children under the age of 13 or pets be within 310 cm (10 feet) of the treadmill. always unplug the treadmill from the electrical outlet immediately after using, and before cleaning, performing maintenance and putting on or •...
-
Page 4: Grounding Instructions
VISION TREAdMIll model name: damaged, or has been immersed in water. Contact your authorized Vision Fitness retailer for replacement or repair. - Page 5 GRIP PULSE BARS CIRCUIT BREAKER CIRCUIT BREAKER POWER CORD SUPPORT BAR POWER CORD MOTOR COVER BASE FRAME COVER (TF40 ONLY) RUNNING BELT / RUNNING DECK TRANSPORT WHEEL SIDE RAIL SIDE RAIL RUNNING BELT / RUNNING DECK ROLLER END CAP TRANSPORT WHEEL...
-
Page 6: Tools Included
SPRING WASHERS (B) are any missing parts, contact noTe: a light application of grease may aid in the installation of hardware. any grease, ARC WASHERS (C) your authorized Vision Fitness such as lithium bike grease, is recommended. BASE FRAME retailer. - Page 7 Tf40 assemBlY STEP 1 Tf20 assemBlY STEP 1 noTe: This step is for TF20 models only. noTe: This step is for TF40 models only. Tf40 HARdWARE fOR STEP 1 : Tf20 HARdWARE fOR STEP 1 : open hardware for step 1.
-
Page 8: Assembly Step
assemBlY STEP 2 T40 assemBlY STEP 3 noTe: This step is for T40 models only. open hardware for step 2. HARdWARE fOR STEP 2 : T40 HARdWARE fOR STEP 3 : guide console cables from handlebars open hardware for step 3. BOLT (F) SPRING FLAT... - Page 9 Qty: 2 Qty: 2 Tf40 ONly Tf20 ONly noTe: This step is for TF40 models only. noTe: This step is for TF20 models only. open hardware for step 3. open hardware for step 3. attach the bottom of the support bar to the...
- Page 10 T40 assemBlY STEP 4 Tf40 assemBlY STEP 4 noTe: This step is for T40 models only. noTe: This step is for TF40 models only. HARdWARE fOR STEP 4 : HARdWARE fOR STEP 4 : open hardware for step 4. open hardware for step 4.
- Page 11 Tf20 assemBlY STEP 4 assemBlY STEP 5 noTe: This step is for TF20 models only. open hardware for step 5. HARdWARE fOR STEP 4 : HARdWARE fOR STEP 5 : open hardware for step 4. Remove 2 pre-installed screws to FLAT SPRING TF20...
-
Page 12: Limited Home-Use Warranty
Qty: 6 WEIGHT CAPACITy attach water bottle holder and T40 = 400 lbs (182 kilograms) accessory holder to left and right Tf40 = 400 lbs (182 kilograms) handlebars using 6 bolts (m). Tf20 = 375 lbs (170 kilograms) CONSOLE BASE HANDLEBAR ElECTRONICS &... -
Page 13: Exclusions And Limitations
EXClUSIONS ANd lIMITATIONS SERVICE ANd REPAIRS TReadmill oPeRaTion who is covered: • delivery, assembly, installation, setup for original or replacement units or labor or other costs associated with • The original owner and is not transferable. removal or replacement of the covered unit. what is covered: •... - Page 15 Vision Treadmills owner's manual 082812' | © 2012 Vision Fitness...