Table of Contents
Advertisement
restart from the point where it left off when you make
the printer
ready again.
Feeding paper through the printer
There are a number of ways in which you can feed paper
through the printer.
One line or several
lines at a time
Make the printer
not-ready
by pressing the (~]
button, and press the
[PAPER
FEED]
button. This will feed
the paper forward one line. If you continue to hold down
the
[PAPER
FEED]
button, the printer will continue to feed
A
the paper one line at a time.
Make the printer
ready again to continue printing.
page at
a
time
'T~is will either eject a cut sheet or feed fanfold paper to
the top of the next sheet. To determine where the top of
a sheet should be, see "Setting the top of a form" on
page 35.
If you want to feed a page of paper through the
printer. make the printer
not-ready.
Press and hold
down the
[PAPER
FEED]
button.
While holding down the
[PAPER
FEED]
button, press the
m
button.
Release both buttons at the same time. The paper will
feed through.
Individual form tear-off
You can tear off individual sheets (for instance, sales
invoices) from fanfold paper.
While the printer is in
ready mode, press and hold
down the [~]
button.
Press the
[PAPER
FEED]
button. The paper will move
- forward about 2 inches (50mm), so that you can tear
off the sheet.
Page34
Advertisement
Table of Contents
