Ricoh Priport 1250 Operating Instructions Manual page 67

SilverV-gb.book Page 47 Monday, May 15, 2000 3:32 PM
C
Press the { { { { Combine} } } } key to select your desired mode.
Reference
For the details of this function, See ⇒ P.33 "Combine—Combining 2 Origi-
nals onto One Print".
D
Press the { { { { Start} } } } key.
E
Check the image position of the trial or proof print.
Note
If the image position is not correct, adjust it using the {Image Position} keys
(see ⇒ P.9 "Shifting the Print Image Position Forward or Backward") or the
side tray fine adjusting dial (see ⇒ P.10 "Shifting the Print Image Position to
the Right or Left").
After the first original is on the master, the second original is fed.
If you set only one original, the beeper sounds after the first original is on
the master. Set the second original and the desired image settings. Then,
press the {Start} key.
Printing Using the Optional 30 Originals Document Feeder
TSLS012E
2
47