Fine Mode-Making Clear Prints - Ricoh Priport 1250 Operating Instructions Manual

SilverV-gb.book Page 13 Monday, May 15, 2000 3:32 PM
Fine Mode—Making Clear Prints
Use the {Fine} key to make clear
prints.
A
Press the { { { { Fine} } } } key to select Fine
mode.
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the { { { { Start} } } } key. Check the
image position of the trial or
proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see ⇒ P.9 "Ad-
justing the Print Image Position")
or the side tray fine adjusting
dial (see ⇒ P.10 "Shifting the
Print Image Position to the Right
or Left").
Fine Mode—Making Clear Prints
D
Enter the number of prints with
the number keys.
E
Press the { { { { Print} } } } key.
TSLS012E
1
TSLS014E
13