Ceiling Mount - Vivotek Supreme MD8531H User Manual

VIVOTEK

3.3 Ceiling Mount

Then, follow the steps below to install the camera to either a ceiling or wall:
1. Attach the supplied alignment sticker to the ceiling/wall.
2. Using the 4 screw circles on the sticker, drill 4 pilot holes into the ceiling/wall. Then ham-
mer the plastic anchors into the holes if necessary.
3. This Network Camera can be mounted with the cable routed through the ceiling/wall or
from the side. If you want to feed the cable through the ceiling/wall, drill a cable hole A
as shown in the picture. If the cable goes through the rear opening of the dome cover,
please remove the plastic cover (B).
4. Through the 4 holes on the camera base, insert the screws to corresponding holes and
secure the camera base with a screwdriver.
1
B
12 - User's Manual
3
2
A
A
4