AMX Precis LT Instruction Manual page 27

Attaching Video Cables
Standard Video
The video BNC connectors are color coded; the white BNC connectors are inputs and the black BNC
connectors are outputs.
To attach BNC cables:
1.
Fasten the cable connectors onto the input and output BNC connectors (FIG. 10).
FIG. 10
Fasten cable connector onto BNC connector
S-Video
The Precis LT S-Video models are equipped with locking S-Video connectors. When used in conjunction
with AMX AutoPatch manufactured S-Video cables, the cable connectors lock into the Precis LT
connectors. Cables with standard S-Video connectors may be used, but will not lock.
To attach S-Video cables:
1.
Fasten the cable connectors onto the input and output S-Video connectors (FIG. 11).
FIG. 11
Fasten cable connector to the S-Video connector
Caution: The connector or the Precis LT may be damaged by pulling on the cable instead of the
housing to remove a locking S-Video connector.
To attach locking S-Video cables:
1.
Hold the connector at a slight angle to the right while pushing in.
Or
Pull back on the housing of the connector (FIG. 12) while pushing the connector in.
FIG. 12
Pull back housing to fasten or unfasten locking S-Video connectors
To remove locking S-Video cables:
Pull back on the housing of the connector (FIG. 12).
Precis LT Instruction Manual
Housing
Installation & Setup
21