AMX Precis LT Instruction Manual page 16

Overview & General Specifications
Rear View Components
The following sections briefly introduce the hardware on the rear of the enclosure.
Control Port
Precis LT enclosures have a serial (RS-232) port, which is labeled "Control," for attaching a PC or an
external control device (FIG. 3).
Power receptacle
Control port
FIG. 3
Rear view components (Precis LT 8x8 S-Video with 4-pin DIN, Stereo Audio with 5T Phoenix-style model shown)
Power Receptacle and Switch
The universal power receptacle is in the upper left hand corner on the rear of the enclosure (FIG. 3).
Maximum power specifications are between the power receptacle and the switch. The power receptacle
will accept all major international standard power sources. (A standard US power cord is included with
all shipments within the US.)
Input and Output Connectors
Input and output connectors are the attachment points for source and destination devices that connect to
the system. Viewed from the rear, on some models video inputs and outputs are side-by-side on the left
side of the enclosure and audio input and output connectors are side-by-side on the right. On other
models, video inputs are above audio inputs on the left side of the enclosure and video outputs are above
audio outputs on the right.
For specific information on the input and output connectors in your system, including cabling directions,
see "Attaching Inputs & Outputs" on page 20.
Serial Number
Viewed from the rear, the system's serial number is located on the left side of the enclosure near the
power receptacle. Before installation, we recommend recording the system's serial number in an easily
accessible location.
10
Control (serial) port
Power receptacle, switch, and power specifications
System serial number
Input and output connectors
Power switch & power specifications
Video inputs
Video outputs
Audio inputs
Audio outputs
Precis LT Instruction Manual