Decorative Fronts - Heat & Glo XLR-N-AU Owner's Manual

D. Decorative Fronts
WARNING! Risk of Fire! A decorative front is required
for this model. DO NOT operate this appliance without a
decorative front in place.
Only doors certified for use with this appliance model may
be used. Contact your dealer for a list of doors that may
be used.
TONIC DECORATIVE FRONT
(TN-SLR-**)
Figure 13.15 Tonic Decorative Front
MARTINI DECORATIVE FRONT
(MT-SLR-**)
Figure 13.16 Martini Decorative Front
52
Inside and Overlap Fit
See Section 13.C.
Overlap Fit Only
See Section 13.C.
Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. M • 5/12
TONIC FRONT
A
B
Figure 13.17. Dimensions of Tonic Decorative Front.
Table 1. Dimensions of Tonic Decorative Front.
A Top of decorative front to bottom of appliance.
B Bottom of decorative front to bottom of appliance.
C Inside dimension of decorative front (width).
D Outside dimension of decorative front (width).
E Inside dimension decorative front (height).
F Outside dimension of decorative front (height).
E F
C
D
26 in.
(670 mm)
7 in.
(175 mm)
39 in.
(991 mm)
44-1/2 in.
(1.13 m)
13 in.
327 mm
19-1/2 in.
495 mm