Honda ST1300 2006 Setup Instructions page 15

2006 ST1300/A
10. Install the handlebar cover and saddlebag
lever lock.
PARTS
Handlebar cover
Special screw 4 x 6.5 mm
Remove the ignition key from the ignition.
Remove the protective tape.
Attach the handlebar cover using two
4 x 6.5 mm special screws.
Torque the screws.
Torque: 1.2 N·m (0.12 kgf·m, 0.9 lbf·ft)
Open the left fairing pocket with the
ignition key.
Take out the saddlebag lever locks from the
left fairing pocket.
Insert the ignition key into the saddlebag
lever lock and turn it clockwise to the position
shown.
Push in on the saddlebag lever lock while
aligning it with the cutout in the saddlebag
as shown.
12
QTY
1
2
4 x 6.5 mm SPECIAL SCREWS
IGNITION
KEY
IGNITION
KEY
CUTOUT
©2006 American Honda Motor Co., Inc. - All Rights Reserved
HANDLEBAR
COVER
PROTECTIVE
TAPE
FAIRING POCKET
SADDLEBAG
LEVER LOCKS
SADDLEBAG
LEVER LOCK