Honeywell ADEMCO VISTA-10P Installation And Setup Manual page 63

Compatible 5800 Series Transmitters Table (continued)
Model Product
5817 Multi-Point Universal
Transmitter
5818 Recessed
Transmitter
5819 Shock Processor
Transmitter
5819WHS Shock Processor
5819BRS Transmitter
5827 Wireless Keypad
5827BD Wireless Two-Way
Keypad
5849 Glassbreak Detector
5890 PR Detector
5899 Magnets
Input Type Description
Has three unique input (loop) codes: one for a "Primary" contact
RF
loop with programmable options; the others for two "auxiliary"
closed circuit contact loops.
• Reed switch magnetic contact sensor; easily hidden in the frame
RF
and edge of a door or window.
• Has a single unique input (loop) code.
• Connects to externally mounted inertia-type shock detector (not
RF
supplied).
• Has built-in tampered cover switch.
• Has 3 unique input (loop) codes:
Loop 1: Terminals for a wired, N.C. sensor loop.
Loop 2: For a closed circuit contact loop using the built-in reed
switch in conjunction with a magnet.
Loop 3: Terminals for a wired, closed circuit contact loop.
• Has built-in shock sensor.
RF
• Has built-in tampered cover switch.
• Has 3 unique input (loop) codes:
Loop 1: Built-in shock sensor loop wired to TB1 (normally closed).
Loop 2: For a closed circuit contact loop using the built-in reed
switch in conjunction with a magnet.
Loop 3: Externally wired, closed circuit loop connected to TB2.
• Can be used to turn the burglary protection on and off.
Uses House
ID only • Features the same built-in panic functions as wired keypads.
• The keypad is identified as zone "00" on wired keypads when it
transmits with a low battery.
• Requires 5800TM Transmitter Module.
Uses House
• Operates the system similarly to wired keypads, including panics.
ID only
• Can indicate system status via its 3 LEDs and sounder.
• Includes 3 panic keys.
• House ID must also be set.
RF
• Requires both sound and shock of breaking glass to cause
alarm to be transmitted.
RF Dual-element passive infrared detector/transmitter with built-in
selectable pulse count.
Note: There is a 3-minute lockout between fault transmissions to
conserve battery life.
Package of 4 magnets for use with 5816 and 5817 transmitters.
8-3