To Turn Off The Built-In Display; To Connect A Printer; To Install A Printer - HP OmniBook 5700 Installation And Setup Manual

To turn off the built-in display

• Press Fn+F5 to switch between the external and built-in display.

To connect a printer

• Plug the printer cable into the appropriate port at the back of the OmniBook.
A parallel printer is normally at the LPT1 port.
An infrared printer is normally at the LPT3 port (a "virtual" port).
A serial printer is normally at the COM1 port.
Infrared port
Serial port

To install a printer

Before you can print from your OmniBook, you have to install the printer so that it
can communicate with the OmniBook.
• In Windows 95—select Start, HP User Tools, Setup, Printers.
• In Windows for Workgroups—double-click Control Panel, Printers.
Expanding the OmniBook
Connecting Devices
Parallel port
3-9