To Select One Of The Factory-Installed Operating Systems - HP OmniBook 5700 Installation And Setup Manual

C A U T I O N
C A U T I O N
Starting Out with Your OmniBook
Setting Up the OmniBook
The first time you plug in the ac adapter, let the OmniBook charge continually
for at least 24 hours. This ensures that the OmniBook's clock battery is fully
charged. Otherwise, your OmniBook will not keep the correct date and time.
Subsequent charging of the primary battery, during normal use, will maintain
the clock battery's charge.
The HP F1044B ac adapter used with this product is disconnected from the
power by unplugging the power cord from the power outlet or from the ac
adapter. Therefore, the power outlet should be located close to the product
and be easily accessible.
3. Press the blue On/Suspend button.
The OmniBook will take half a minute or more to start. If the OmniBook does
not turn on, press the Off button on the left side of the OmniBook, then press
the blue button again.

To select one of the factory-installed operating systems

This product offers a choice between two Microsoft operating systems:
• Windows 95, or
• Windows for Workgroups.
1-4