To Turn Off The Built-In Display; To Connect A Printer; To Install A Printer - HP OmniBook 5700 Installation And Setup Manual

To turn off the built-in display

Press Fn+F5 to switch between the external and built-in display.

To connect a printer

Plug the printer cable into the appropriate port at the back of the OmniBook.
A parallel printer is normally at the LPT1 port.
An infrared printer is normally at the LPT3 port (a "virtual" port).
A serial printer is normally at the COM1 port.
Infrared port
Serial port

To install a printer

Before you can print from your OmniBook, you have to install the printer so that it
can communicate with the OmniBook.
In Windows 95—select Start, HP User Tools, Setup, Printers.
In Windows for Workgroups—double-click Control Panel, Printers.
Expanding the OmniBook
Connecting Devices
Parallel port
3-9