Others Menu - Epson EB-Z8050W User Manual

List of Functions

Others Menu

Sub Menu
Trap IP Address 1/Trap IP
Address 2
Priority gateway
AMX Device Discovery
You can register up to two for the SNMP
You can input a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a
network administrator.
For the priority gateway, select either Wireless LAN or Wired LAN.
When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery
you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.
Function
g
trap notification destination.
65
g
. Set this to Off if