Esc/Vp21 Commands; Command List; Cable Layouts; Serial Connection - Epson EB-Z8050W User Manual

ESC/VP21 Commands

Command List

When the power ON command is transmitted to the projector, the
power turns on and it enters warm-up mode. When the projector's
power has turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error
message is output and a ":" is returned.
Item
Power ON/OFF On
Off
Signal selection Computer
BNC
HDMI
DVI-D
Video
S-Video
Shutter On/Off On
Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Command
PWR ON
PWR OFF
Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
Auto SOURCE BF
RGB SOURCE B1
Component SOURCE B4
SOURCE A0
SOURCE 30
SOURCE 45
SOURCE 42
MUTE ON
MUTE OFF

Cable Layouts

Serial Connection

• Connector shape: D-Sub 9-pin (male)
• Projector input port name: RS-232C
<At the projector>
<At the projector>
Signal Name
GND Signal wire ground
TD Transmit data
RD Receive data
<At the computer>
(PC serial cable) <At the computer>
Function
111