Load Envelopes - HP 610 Printing Manual

paper
Postcards
(only works with
printing function)
4" x 6" photo
paper (only works
with printing
function from the
upper paper tray)

load envelopes

Envelopes must be loaded differently depending on whether you are
printing one envelope or multiple envelopes. Do not use shiny or embossed
envelopes, or envelopes that have clasps or windows.
to print one envelope
1
2
3
to print multiple envelopes
1
2
3
load envelopes
hp digital copier 610 printing and software guide
tips
In the upper paper tray, insert a stack of postcards
with the print-side down until it stops. Line up the
postcards on the right side of the upper paper tray,
slide the paper-width guide up against the left side
of the cards, and slide the paper-length guide in until
it stops.
In the upper paper tray, insert the photo paper with
the print-side down until it stops. Place the long edge
of the photo paper against the right side of the upper
paper tray, slide the paper-width guide up against
the long edge of the photo paper, and slide the
paper-length guide in until it stops. If the photo paper
has perforated tabs, load the paper so that the tabs
are closest to you.
Slide the envelope into the envelope slot, which is located on the right
side toward the back of the output tray.
Insert the envelope with the flap up and on the left, as shown.
Slide the envelope in until it stops.
Remove all paper from the upper paper tray.
Slide a stack of envelopes into the tray, with the envelope flaps up and
on the left (print-side down), until they stop.
Adjust the paper-width and paper-length guides against the
envelopes, being careful not to bend the envelopes, as shown.
3