Printing Is Too Slow - HP 610 Printing Manual

hp digital copier 610 printing and software guide
If your problem persists although all of the conditions above are met, refer
to the following solutions.
problem
Power light is blinking If the On light is blinking, the printer is in the
Ink cartridges need to
be replaced
Printheads need to be
replaced
If none of the solutions above solve the problem, you may want to uninstall
and reinstall the printer software. For more information, see uninstall and
reinstall software on page 12.

printing is too slow

Several variables can slow printing performance. For more information, see
the Troubleshooting chapter in the HP Digital Copier 510/610 Reference
Guide.
problem
Multiple software
programs are open
Complex documents,
graphics, or
photographs are
printing
30
solution
process of printing. No action is needed. Your HP
Digital Copier will process the print job as quickly
as it can.
If an ink cartridge expires or runs out of ink, it
needs to be replaced. For more information, see
Replacing Ink Cartridges in the HP Digital Copier
510/610 Reference Guide.
If multiple printheads fail, the printer may stop
printing. For instructions on replacing printheads,
see Replacing Printheads in the HP Digital Copier
510/610 Reference Guide.
solution
If too many software programs are open, the
copier/printer cannot print at its normal speed.
Close all unnecessary software programs, then
print the document again.
Documents that contain graphics or photographs
print slower than text documents. To print faster,
open the Properties dialog box, then select one of
the following:
• In the Setup tab, select PhotoREt for photo
paper printing.
• In the Color tab, select Low Memory Mode.
troubleshooting tips