Use The Features Tab - HP 610 Printing Manual

hp digital copier 610 printing and software guide
6
restore factory
Use the Factory Settings function to restore the original default settings
defaults related to the Setup tab.

use the features tab

The Features tab allows you to adjust the following printer settings:
•
•
•
•
•
•
•
•
Whenever you make a change in print settings in this tab, you can confirm
your change by viewing the image in the right corner or by enabling the HP
Preview feature. For more information, see enable the hp preview feature on
page 23.
print on both
You can print two-sided pages with your HP Digital Copier. When printing
two-sided pages, make sure to use paper that is thick enough so the images
sides of the page
do not show through to the other side. Some paper types, such as
transparencies and photo papers, have only one printing surface and
should not be used for two-sided printing.
1
2
3
20
Click OK to close the Print Settings dialog box.
print on both sides of the page
adjust the ink volume and dry time
print multiple pages on a single sheet
print a poster
print a watermark
print last page first
enable the hp preview feature
set the number of copies
Tip! To automatically print on both sides of the page, you
must have a two-sided printing accessory installed and
activated. The two-sided printing accessory is standard
equipment on some models. It can be purchased as an
accessory for all other models. For more information about
the accessory, see the HP Digital Copier 510/610 Reference
Guide.
If you are using Windows 2000 or XP, make sure that the Automatic
Two-Sided Printing Module option is activated. For more information,
see use the configuration tab on page 26.
Tip! If you have a two-sided printing accessory, the Automatic
option is selected by default. If you do not have a two-sided
printing accessory, the option is not available.
Select File, Print, select hp digital copier color series, then click
Properties.
Click the Features tab.
use printing features