HP 610 Printing Manual page 31

4
5
6
7
8
9
10
print a
For best results, we recommend that you use HP transparency film products
presentation on
with your HP Digital Copier.
transparency
1
film
2
3
4
5
6
print a group of
With your HP Digital Copier, you can print on a single envelope, groups of
addresses on envelopes, or label sheets designed for inkjet printers.
labels or
envelopes
perform special print jobs
hp digital copier 610 printing and software guide
In the All Pages tab, Paper Type section, select Special Papers, then
select HP Banner Paper.
Your HP Digital Copier automatically sets the Paper Size to Banner.
Verify that the Paper Size is set correctly.
Your HP Digital Copier supports both letter-size and A4-size banner
paper.
Click OK to close the dialog box, and then click OK to print the
banner.
After the banner is printed, a message indicates that the job is
complete.
Tear off and remove any unused paper from the input tray.
Press Enter on the front panel to eject any additional paper.
Remove your banner from the output tray, and lower the output tray
back into its standard position.
Reload the regular paper.
Load the transparency film into the paper tray.
Select File, Print, select hp digital copier color series, then Properties.
Click the Setup tab.
In the Paper Type list, point to Transparency Films, then click the
transparency type.
For more information, see adjust paper settings for printing on
page 4.
If you want to make notations on the back of the transparencies and
erase them later without scratching the original, click the Setup tab,
and select the Mirror Image check box.
For more information, see reverse an image for iron-on transfers on
page 16.
Click OK to close the dialog box.
Your HP Digital Copier automatically waits for transparencies to dry
before releasing them. Ink dries more slowly on film. Be sure to allow
enough time for the ink to dry before handling the transparency.
27