Two-Sided Printing Problems - HP 610 Printing Manual

problem
Automatic paper type
option is enabled
Two-sided printing
does not seem to work
Printer software is
outdated
Computer does not
meet system
requirements
Printhead is failing

two-sided printing problems

Several issues may occur when you try to print a two-sided document. For
more information, also see Troubleshooting in the HP Digital Copier 510/
610 Reference Guide.
problem
The option for two-sided
printing cannot be selected
Paper size changes when the
two-sided printing option is
selected
two-sided printing problems
hp digital copier 610 printing and software guide
solution
When the Automatic paper type option is
enabled, it takes a few seconds for the printer to
determine the appropriate paper type. To increase
the print speed, specify a paper type. For more
information, see adjust paper settings for printing
on page 4.
Allow more time to print two-sided documents than
to print single-sided documents.
Download the most recent software updates for
the printer at:
www.hp.com/go/copiers
• Check the computer's RAM and processor
speed. For more information, see system
requirements on page 35.
• Increase the space on your hard drive. If your
computer has less than 100 MB available on
the hard drive, the printer will require more
time to process printing jobs.
A failing, but usable, printhead might slow printer
performance. Print a Self-Test Report from the front
panel to check whether a printhead is failing. For
more information, see Self-Test Report in the HP
Digital Copier 510/610 Reference Guide.
solution
In the Setup tab, verify that the paper type
and size you have selected are supported
by the two-sided printing accessory. For a
list of supported paper types, see load
specialty paper for printing on page 2.
This means that the paper size selected in
the Setup tab of the Properties dialog box
is not supported by the two-sided printing
accessory. Select a supported paper type
and size.
31