Xerox DocuColor 3535 User Manual page 147

Auto Clear
Auto Job Release
Auto Print
Auto Power Saver
Xerox DocuColor 3535 Printer/Copier
Sets the time to wait before returning the Control Panel to the
default screen. The amount of time until reset can be set to:
• 0
OR
• 60 ~ 240 seconds, in 60-second increments.
Enter the value using the numeric keypad on the Control Panel.
The default is 60 seconds.
Tells the machine to release the current job to enable the
execution of the next job when a fault occurs during copying or
scanning. The job can be executed only in parts of the machine
that are functioning normally. Set the time to:
• 0 - do not automatically release the job.
• 240 ~ 5940 seconds (4 ~ 99 minutes) in 60-second
increments.
Enter the value using the numeric keypad on the Control Panel.
The default is 600 seconds.
Allows the machine to automatically start print jobs when there
has been no activity for a set amount of time. Set the time to:
• 1 ~ 240 seconds in 1-second increments.
Enter the value using the number keys on the Control Panel. The
default setting is 10 seconds.
Low Power Mode and Sleep Mode are part of the energy-saving
mode. As time lapses, the machine lowers power consumption:
Last Operation -> Low Power Mode -> Sleep Mode.
• Set the time to Low Power Mode from 6 ~ 240 minutes and
• Set the time to Sleep Mode from 0 ~ 234 minutes
Both are set in 1 minute increments.
NOTE: Low Power Mode cannot be disabled. The total set time of
both Low Power Mode and Sleep Mode must be between 15 - 240
minutes.
4 –9