Xerox DocuColor 3535 User Manual page 124

Auto Size Detect
Standard Sizes
Non-standard Sizes
3– 1 2
Scan Size
The Scan Size feature lets you to specify how the size of the
original document is determined.
The copier automatically recognizes the size of standard originals
in the DADF. This is the default setting.
Select the document size from one of the 11 preset sizes. These
presets can be changed in System Settings mode. You must
place the original on the Document Glass.
Allows you to manually enter the size of the document placed on
the Document Glass.
1
Load your originals and select the desired job template.
2
Select Scan Size on the Scan Options tab. The Scan Size Input
screen is displayed.
3
Select the desired option:
• Select Auto Size Detect to have the machine identify the
size of the original document.
• Select the appropriate size from one of the preset buttons.
• Enter the width (x) and the length (y) dimensions of the
original document.
Press the arrows to decrease or increase the X and Y
dimensions. X dimensions range from 15 to 432 mm (0.6
to 17.0 inches). Y dimensions range from 15 to 297 mm
(0.6 to 11.7 inches) in 1 mm (0.1 inch) increments.
4
Select Start to begin scanning, or Save to select additional
scanning features.
Xerox DocuColor 3535 Printer/Copier