Table of Contents
Advertisement
FIGURE 2
4.
5.
Using the BIOS Configuration Utility
BIOS Configuration Menu (Adapter Configuration)
Select one of the following:
•
Adapter Settings. Use the Adapter Settings screen to enable BIOS, adapter port speed (HBAs
and Fabric Adapter ports configured in HBA mode only), and discovery of boot LUN
information from the fabric. You can determine adapter N and PWWN. Proceed to
•
Boot Device Settings. Use the Device Settings screen to select the boot target and LUN for
booting the host system. Proceed to
Select Adapter Settings and press Enter to begin adapter configuration.
A screen similar to that shown in
version, NWWN and PWWN.
and boot LUN settings.
Using the Brocade BIOS Configuration Utility
step
7.
Figure 3
on page 36 displays showing the port's current BIOS
Table 3
on page 36 explains options available for BIOS, port speed,
A
step
5.
35
Advertisement
Table of Contents
