IBM Flex System FC5024D User Manual page 30

2
Configuring the adapter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
You can modify parameters on Linux systems using modprobe.
You can modify parameters on VMware systems using esxcfg-module.
For more detailed information, refer to the "Adapter Configuration" appendix in the Brocade Adapters
Installation and Reference Manual.
NOTE
These parameters should only be changed by power users with great caution.
Windows driver parameters
You can modify default values for the following parameters:
•
•
•
•
•
•
You can modify these parameters using the drvconf --key command, the Registry Edit tool, and BCU
commands. For more detailed information, refer to the "Adapter Configuration" appendix in the
Brocade Adapters Installation and Reference Manual.
22
Auto recover IOC on heartbeat failure
BFA log level.
Maximum transfer size
Maximum logins to initiator and target ports
NetQueue enable and disable
MSIx interrupt enable or disable
Maximum number of logins to targets on a port
Maximum number of scatter gather pages
Maximum task management commands
Maximum unsolicited FC receive buffers
Maximum unassisted FC exchanges
Maximum number of FCIP I/O requests
Maximum number of remote ports
Maximum number of task management commands
Maximum number of unsolicited FC receive buffers
Operating system name
OS patch level
Number of elements in request queues
Delay for deleting offline remote port
Number of elements in request queues
Enable or Fabric Device Management Interface (FDMI) registrations
Maximum SCSI requests per LUN
Auto recovery of I/O controller on heartbeat failure
Delay for deleting offline remote port
Maximum number of concurrent logins to a remote port
Disable MSIx interrupt
IBM Flex System FC5024 4-Port 16Gb FC Adapter User's Guide