Notices And Statements In This Document - IBM Flex System FC5024D User Manual

For other information on the IBM Flex System FC5024D 4-Port 16Gb FC Adapter, refer to sections on
the Brocade 1869 Adapter in documentation located at www.brocade.com/adapters-ibm-flex. The
following publications are available:
•
•
•

Notices and statements in this document

Introduction
Brocade Adapters Installation and Reference Manual. See the following chapters and information:
-
Product Overview chapter
This chapter provides detailed information on hardware and software features, driver packages,
boot installation packages, and operating system support.
-
Specifications chapter
This chapter provides complete hardware specifications, including environmental and power
information.
-
Boot Code chapter
This chapter describes host boot support available on the adapter and includes procedures to
update adapter boot code, configure boot over SAN, and configure fabric-based boot over
SAN. Use this chapter when configuring a host to boot its operating system from a boot device
located somewhere on the SAN instead of the host's local disk or direct-attached storage.
-
Adapter Configuration appendix.
This appendix is optional for expert network administrators who need to modify values for
adapter instance-specific persistent and driver-level configuration parameters.
Brocade Adapters Administrator's Guide. Refer to this guide for details on using Brocade
Command Line Utility (BCU) commands and the Host Connectivity Manager (HCM) application.
Brocade Adapters Troubleshooting Guide. This guide contains complete information on
troubleshooting problems for all Brocade adapter models.
Notices and statements in this document
Notices for Network Device
1
3