4.3 User configurations
Addr-DMX Address Setting via control board
1. Tap the MENU button until Addr is displayed, press ENTER.
2. X will now be displayed, X represents the displayed address. Press the UP or DOWN
buttons to find your desired address.
3. Press ENTER to confirm, and then press and hold the MENU button for at least three
seconds to assign.
SLA Master-Slave online mode:
1. SL00: slave mode
2. SL01: master mode
SOUN Soundactive:
1. SOU1: sound control of strobe
2. SOU2: sound control of color change
Etc.
DMX mode
This mode allows the unit to be controlled by any universal DMX controller.
The default mode for the fixture is DMX, as follows
4.4 DMX channel values
Channel
Value
0 - 255
1
2
0 - 255
0 - 255
3
4
0 - 255
5
0 - 255
6
0 - 255
7
0 - 255
8
0 - 255
5. Technical data
Model
Voltage
Power consumption:
LED
Weight
Dimensions
Dimmer
Red
Green
Blue
7 color change + speed (from 105 to 255)
Color shade
Strobe
Sound activated
PLLED185
110V- 240V / 50-60Hz
25W
7 x 3W RGB full color
3,5Kgs
230(H) x 230(W) x 450(L) mm
15
Function