Cleaning And Care; Accessories - Miele H 387-2 BP KAT Operating Instructions Manual

Before cleaning or servicing the
oven, disconnect it from the power
supply by either shutting off the
power main or manually "tripping"
the circuit breaker.
Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on any part of the
oven. They will damage the
surfaces.
Appliance front
The front of the appliance and the
control area can be cleaned with a
sponge and a solution of warm water
and non abrasive liquid detergent. Dry
with a soft cloth.
Glass surfaces can be cleaned with a
glass cleaner.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored control
Clean the buttons and knobs with a
damp sponge and a solution of warm
water and soap.
These controls may become discolored
or damaged if not cleaned regularly.

Cleaning and care

Accessories

Remove all accessories as well as
the runners from the oven before
starting the Self Clean program. The
high temperatures needed for this
program will damage the
accessories and cause irreparable
damage.
Roast probe
Wipe with soapy water and a
non-abrasive damp cloth. Rinse under
running water.
Do not submerge the roast probe
into water or clean in the
dishwasher.
Grease filter
Clean with liquid dish soap and hot
water, or in the dishwasher.
Depending on the detergent, cleaning
the grease filter in a dishwasher may
cause permanent discoloration of the
filter surface. Performance of the filter
will not be affected by this
discoloration.
Rotisserie
Wash and dry after each use.
Remove stubborn residues with a
stainless steel cleaner.
43