Minelab Explorer II Manual page 74

THE MINELAB EXPLORER II
www.minelab.com
LEARN'S TARGET SELECTION
Figure 6.5 Adjusting size of learnt region
Figure 6.6 Saving the newly-edited
6
74
LEARN'S TARGET SELECTION
... continued
discrimination pattern
tutorial !
Phase 2: Learning and Saving the target pattern
Wave the search coil several times above the desired
STEP 7
target until the detector learns it by clearing an area on
the screen. Learn needs to 'see' the target consistently to
accept it for inclusion. If you have more than one target,
repeat the procedure for each one. In Figure 6.5, two
current high denomination coins have been used.
When you have finished learning the targets, press the
STEP 8
shift button next to the flashing tick.
Press the shift button next to the Save icon to go directly
STEP 9
to the SAVE DISCRIM menu. Press a button next to your
choice of option S1–S6 (for example S1 in Figure 6.6).
This will save the learnt discrimination pattern for future
use.
Press the DETECT shortcut button to return to the
STEP 10
detect screen. SELECT DISCRIM will then use this
saved pattern as the current search pattern.
NOTE For more detail on SAVE DISCRIM, turn to page 80.